Pipe Heat Trace

Nuheat self-regulating heating cables for pipe heat tracing are installed on metal and plastic pipes to prevent them from freezing. The self-regulating cable technology automatically adjusts the heat output of the cable based on the pipe temperature to optimize energy consumption.

Heating Cables

Weather-Ready™ Heat Trace Cables

Weather-Ready™ Heat Trace Cables are designed for commercial and residential heat trace applications for indoor/outdoor metal or plastic pipes (can also be used for roof & gutter deicing).

Weather-Ready™ Heat Trace Plug-In Cables

Weather-Ready® plug-in heating cables are designed for residential and commercial roof & gutter de-icing and pipe heat tracing applications.

Thermostats

STAT-LS-40F

The STAT-LS-40F thermostat automatically switches power to the heating cable(s) on/off at 40°F (5°C).

STAT-LS-ADJ

The STAT-LS-ADJ thermostat features an adjustable temperature set point at which the thermostat will switch the heating cable(s) on/off.

SST-2

The SST-2 thermostat has a built-in 30 mA ground fault protection and switches power to the heating cable(s) on/off at 40°F (5°C).

GPT-3

The GPT-3 thermostat has a built-in 30 mA (adjustable) ground fault protection and features an adjustable temperature set point at which the thermostat will switch the heating cable(s) on/off.

Tracemate Series

The Tracemate Series of thermostats by Nextron Corporation provides monitoring, control, and alarm functions specifically designed for sprinkler pipe protection applications.

Connection Kits

FP-PLUG

The plug-in adaptor kit allows contractors to cut the heating cable (120V only) to length on the jobsite, attach the plug, and insert the plug into a suitable 120V outlet.

Heat Shrink Power Connection Kit

Nuheat's heat shrink power connection kit is used to prepare the heating cable for connection with the power source.

Heat Shrink Splice / Tee Splice Kit

Nuheat's splice / tee splice kit is used to create a splice or a tee-splice for the heating cable.

Heat Shrink End Seal Kit

Nuheat's heat shrink end seal kit is used to terminate the end of the heating cable.

Accessories

Thermocube

Automatically turns power to electrical devices on/off based on ambient temperature and perfect for use with Nuheat heat trace plug-in kits

Aluminum Tape

Aluminum tape is used when applying heating cable to plastic pipes for heat trace applications.

Glass Cloth Tape

Glass cloth tape is used to secure the heating cable to metal or plastic pipes for heat trace applications.

Warning Labels

Warning labels are applied on top of the pipe insulation to inform that there are electric heat trace cables below the insulation.

Your device does not support Flash videos.