Weather-Ready™ Snow Melt Products

Nuheat Weather-Ready™ Snow Melt Products are ideal for electric snow melting applications in concrete, asphalt or under paving stones.


Product Categories: Heating Cables | Connection Kits | Sensors & Controllers | Accessories

Heating Cables

Mineral Insulated (MI) Cable

Mineral Insulated (MI) Cable

The MI cables come factory assembled complete with cold leads and end seal and are constructed with an HDPE outer jacket and seamless copper sheath which makes the cable durable yet flexible.
More information  |  Where to buy

Mineral Insulated (MI) Cable

Self-Regulating Snow Melt Cable

Suitable for concrete and paving stone applications, Nuheat Weather-Ready&trad; Self-Regulating Snow Melt Cables can be cut-to-length on the job site for ultimate flexibility/adaptability and is suitable for 208V-277V applications.
More information  |  Where to buy

Connection Kits

Mineral Insulated (MI) Cable

Heat Shrink Power Connection Kit

Nuheat's heat shrink power connection kit is used to prepare the heating cable for connection with the power source. The kit also includes an end seal to terminate the other end of the cable.
More information  |  Where to buy

Mineral Insulated (MI) Cable

Heat Shrink Splice Kit

Nuheat's splice kit is used to create a splice for the heating cable. The splice kit is also used for any repairs.
More information  |  Where to buy

Mineral Insulated (MI) Cable

Heat Shrink End Seals (Extra)

Nuheat's heat shrink end seal kit are extra end seals used to terminate the end of the heating cable.
More information  |  Where to buy

Mineral Insulated (MI) Cable

Heat Shrink Expansion Joint Kit

Nuheat's expansion joint kit is used to protect the snow melt cable when crossing expansion joints.
More information  |  Where to buy

Sensors & Controllers

CIT-1 Sensor

CIT-1 Sensor

The CIT-1 sensor is an aerial-mounted sensor that detects falling or blowing precipitation as well as low-temperature conditions. The CIT-1 sensor must be used with an APS control panel.

More information  |  Where to buy

GIT-1 Sensor

SIT-6E Sensor

The SIT-6E sensor is a pavement-mounted sensor that detects moisture as well as low-temperature conditions. The SIT-6E sensor must be used with an APS control panel.

More information  |  Where to buy

APS Control Panel

APS Control Panel

APS control panels are used in conjunction with various sensors and manages power to the heating cable(s) while ensuring minimum operating costs. APS control panels feature adjustable hold-on timers that ensures complete melting of snow/ice.
More information  |  Where to buy

DS-2B Sensor/Controller

DS-2B Sensor/Controller

The DS-2B aerial-mounted sensor/controller is a 2-in-1 unit which senses snow conditions and distributes power to the heating cable(s) for 120V/240V applications.

More information  |  Where to buy

HSC-5 Sensor/Controller

HSC-5 Sensor/Controller

The HSC-5 pavement-mounted sensor/controller is a 2-in-1 unit which senses snow conditions and distributes power to the heating cable(s) for 120V or 240V applications via a dry contact.

More information  |  Where to buy

Accessories

Pre-punched Strapping

Snow Melting Caution Plaques

Caution plaques alert contractors and property owners/managers of the presence of electric snow melting cables within the slab below. Comes in set of 2.

More information  |  Where to buy

Pre-punched Strapping

Pre-punched Strapping

Stainless steel pre-punched strapping is used to hold MI Cable runs in place. Tabs that hold the MI cable are spaced at 1" intervals and come in 75ft rolls.

More information  |  Where to buy

 
Bookmark and Share