# How To Measure Guide

Click here to access a grid paper template you can use to measure your floor for the purpose of a nVent Nuheat Mat.

• Step 1: Pick starting point
• Step 2: Begin drawing walls
• Step 3: Record all wall measurements
• Step 4: Include small dimensions
• Step 5: Complete wall measurements to starting point
• Step 6: Draw cabinets & vanities
• Step 7: Measure cabinet toe-kicks
• Step 8: Draw toilet drains
• Step 9: Draw vents
• Step 10: Draw thermostat

## Measuring Angle Locks

• Step 1: Identify the angled side
• Step 2: Label start and end points
• Step 3: Pick an opposite corner
• Step 4: Measure distance from start point
• Step 5: Measure distance from end point
• Step 6: Record both distances
Use the following tips to calculate the square footage of the heated area:

• The heated area of the room should exclude areas beneath counters, fixed furniture, or any other areas where Nuheat cannot be installed under.

Tips to calculate square footage:

• Square footage is calculated by multiplying the length (in feet) by the width (in feet) of an area.
• Triangles are squares/rectangles split diagonally in half. To calculate the square footage of a triangle, multiply the length (in feet) by the width (in feet) of the triangle and divide by two.
• If needed, break up the heated area into smaller squares, rectangles, and/or triangles to help calculate the square footage of the entire area. Calculate the square footage of each individual area and add the square footages together.

Area A = 3′ x 4′= 12 sq ft
Area B = 4′ x 5′= 20 sq ft
Area C = 2′ x 2′ ÷ 2=  2 sq ft
Total 34 sq ft