nVent NUHEAT Cable
& nVent NUHEAT Membrane

The integrated electric floor heating and uncoupling solution.

cable-membrane-header-image
1
NUHEAT-3D-H87392-PeelandStickMembrane-EN-2110
2
MembraneAndCable
4
Nuheat-3D-H84246-Membrane Sheets-ML-1809-FRP

Membrane is a tile underlayment and uncoupling membrane.

Membrane can replace a second layer of plywood/concrete board and reduces the risk of tile cracks caused by movement in the flooring assembly. When integrated with Cable, the Membrane system is a best-in-class integrated uncoupling, waterproofing, and floor heating solution. Membrane eases the installation of Cable by simplifying the installation process. 

Benefits

cracks
Image Here
cracks-red
Image Here
Reduces the risk of tile cracks
‘High Performance’ rating on ANSI A118.12 System Crack Resistance test
under
Image Here
under-red
Image Here
Acts as tile underlayment, replacing a layer of plywood or concrete board in the subfloor assembly
‘Extra Heavy’ rating in the Robinson Floor Test (ASTM C627): nVent NUHEAT Membrane

‘Moderate’ rating in the Robinson Floor Test (ASTM C627): nVent NUHEAT Peel & Stick Membrane
cable-black
Image Here
cable
Image Here

Compatible with nVent NUHEAT Cable

Accommodates nVent NUHEAT Cable, cold lead joint, end seal, and sensor probe without cutting or modification
 
flexible
Image Here
flexible-red
Image Here
Flexible wire spacing and heat output
nVent NUHEAT Cable can be installed with varied spacing for 10, 12, or 15 W/ft2 heat output
inset
Image Here
inset-red
Image Here
Compatible with modified or unmodified thinsets
Installers can use their thinset of choice
install
Image Here
install-red
Image Here
Cleaner and easier installation
Peel & Stick Membrane installs in 40% less time than membranes that require thinset, reduces floor height buildup by eliminating a layer of thinset, and eliminates thinset oozing through seams
drop
Image Here
drop red
Image Here
Waterproofing
Standard nVent NUHEAT Membrane (not Peel & Stick) can be used for waterproofing
flexibility
Image Here
flexibility-red
Image Here
Easily adjusted on-site
Cut on-site to fit the room; ideal for complex room shapes with curves and angles
Stock
Image Here
Stock-Red
Image Here
Available immediately.

Installation

Standard nVent NUHEAT Membrane
Enter subheading text here
membrane-step-1
Enter the instruction image here
Step 1
Enter the step number here
Spread thinset mortar onto the substrate using a trowel.
Enter installation instructions here
Membrane_-_Installation_Steps_-_Step_2_-_Roll_Nuheat_Membrane_Onto_Thinset
Enter the instruction image here
Step 2
Enter the step number here
Press Membrane into thinset using a roller or a flat trowel.
Enter installation instructions here
membrane-step-3
Enter the instruction image here
Step 3
Enter the step number here
Route nVent NUHEAT Cable throughout the heated area.
Enter installation instructions here
Membrane_-_Installation_Steps_-_Step_5_-_Install_Tile
Enter the instruction image here
STEP 4
Enter the step number here
Install floor covering.
Enter installation instructions here

Note:
1. Cable resistance must be tested before, during and after installation for warranty coverage
2. All wiring connections should be completed by a certified electrician


Enter text about materials here
nVent NUHEAT Peel & Stick Membrane
Enter subheading text here
PS-MembraneStep1-606x341
Enter the instruction image here
  STEP 1  
Enter the step number here
Apply acrylic flooring primer to substrate.
Enter installation instructions here
PeelAndStick-606x341
Enter the instruction image here
STEP 2
Enter the step number here

Press Peel & Stick Membrane onto substrate.

Enter installation instructions here
NUHEAT-3D-H87393-PeelandStickMembraneCable-EN-2110
Enter the instruction image here
STEP 3
Enter the step number here
Route cable throughout heated area.
Enter installation instructions here
NUHEAT-3D-H87393-MembraneCableApplication-EN-2110
Enter the instruction image here
STEP 4
Enter the step number here

Install floor covering. 

Enter installation instructions here
Enter text about materials here

Find an Installer

We work with leading industry professionals who are trained and experts at installing nVent Nuheat products. Find one here today.

Find a nVent Nuheat Certified PRO Installer

Request a Quote

Already have a project in mind? Click below to request a quote for your project.

Request a Quote

Technical

NVENT NUHEAT MEMBRANE SPECIFICATIONS
  • Materials

    Polypropylene sheet thermo-bonded to non-woven polypropylene fabric, 0.22 in. thick, 840 grams/m²

  • Subfloor bond

    Apply modified or unmodified thinset with a 1/4" x 3/8” square- or u-notched trowel

  • Waterproofing

    Yes, when used with waterproofing seam tape

  • Ratings

    Robinson Floor Test (ASTM C627): ‘Extra Heavy’ rating
    ANSI A118.12 System Crack Resistance: ‘High Performance’ rating

  • Max Ambient Temp.

    194°F (90°C)

  • Storage Conditions

    Store in a cool and dry place avoiding direct sunlight and heat sources

  • Available Formats

    Large Roll (161 ft2), Small Roll (54 ft2), Sheets (10.6 ft2)



NVENT NUHEAT PEEL & STICK MEMBRANE SPECIFICATIONS
  • Materials

    Vented polypropylene sheet with pressure sensitive adhesive and release liner, 0.22 in. thick, 840 grams/m²

  • Subfloor bond

    Prep surface with acrylic flooring primer and apply membrane to subfloor; additional mechanical bond is created when thinset passes through mortar vents during floor covering installation

  • Waterproofing

    No

  • Ratings

    Robinson Floor Test (ASTM C627): ‘Moderate’ rating
    ANSI A118.12 System Crack Resistance: ‘High Performance’ rating

  • Max Ambient Temp.

    194°F (90°C)

  • Storage Conditions

    Store in a cool and dry place avoiding direct sunlight and heat sources

  • Available Formats

    Sheets (10.6 ft2)

Notes:

  • Recommended nVent NUHEAT Cable spacing is alternating 2-3-2 pillar spacing which produces 12 W/ft2
  • 2-pillar spacing produces 15 W/ft2, which is recommended for installations over concrete slab-on-grade or other areas that require more heat
  • 3-pillar spacing produces 10 W/ft2, which is insufficient heat output for most applications

Pricing & Sizing

  • Catalog Number Part Number Description Weight Size Dimensions Price USD
  • NUMEM250PSFG0801Peel & Stick Membrane Sheets (25 sheets per box)45lbs39" x 39"3'3" x 3'3" $847.78
  • NUMEM161AC0105Nuheat Membrane - Large Roll (161 sqft) 30lbs39" x 14.5"3'3" x 49.5ft $393.54
  • NUMEM054AC0106Nuheat Membrane - Small Roll (54 sqft) 10lbs39" x .5"3'3" x 16.5 ft $145.39
  • NUMEM250FG0800Nuheat Membrane - 10.6sqft Sheets (25 Sheets per box)45lbs39" x 39" $635.88
  • PRBPE1505AC0107Waterproofing Seam Tape - 6" x 16ft1lbs $25.81
  • PRBPE1530AC0108Waterproofing Seam Tape - 6" x 98ft1lbs $126.8

Cable Selection Table

Cable (120 Volt)

Square Foot Coverage
w/ Cable Guides w/ nVent NUHEAT Membrane
3" Spacing
(Std. Output)
2"/3"/2" Spacing
(High Output)
2/3/2 Pillar Spacing
(Std. Output)
2 Pillar Spacing
(High Output)
3 Pillar Spacing
(Low Output)
12 W/ft2 15 W/ft2 12 W/ft2 15 W/ft2 10 W/ft2 Model No. Part No. Length (ft) Amps Watts
8 6 8 6 9 N1C008 FG0601 29 0.7 80
12 9 12 10 14 N1C012 FG0602 47 1.2 138
15 12 15 12 17 N1C015 FG0603 57 1.4 170
25 20 25 21 30 N1C025 FG0604 98 2.5 299
30 25 31 25 36 N1C030 FG0605 120 2.9 343
40 30 38 31 45 N1C040 FG0606 148 3.7 442
50 40 48 39 57 N1C050 FG0607 188 4.7 562
60 50 60 49 71 N1C060 FG0608 234 6 719
70 55 68 55 81 N1C070 FG0609 265 6.8 810
80 65 82 66 97 N1C080 FG0610 318 7.9 947
85 70 86 69 102 N1C085 FG0611 334 8.5 1021
95 80 97 78 115 N1C095 FG0612 377 9.7 1161
110 90 109 88 129 N1C110 FG0613 423 10.8 1299
120 100 122 98 145 N1C120 FG0614 474 12.2 1461

Cable (240 Volt)

Square Foot Coverage
w/ Cable Guides w/ nVent NUHEAT Membrane
3" Spacing
(Std. Output)
2"/3"/2" Spacing
(High Output)
2/3/2 Pillar Spacing
(Std. Output)
2 Pillar Spacing
(High Output)
3 Pillar Spacing
(Low Output)
12 W/ft2 15 W/ft2 12 W/ft2 15 W/ft2 10 W/ft2 Model No. Part No. Length (ft) Amps Watts
15 12 14 12 17 N2C015 FG0615 56 0.7 165
20 15 21 17 24 N2C020 FG0616 80 0.9 224
25 20 26 21 31 N2C025 FG0617 102 1.3 302
35 30 35 28 41 N2C035 FG0618 136 1.7 403
45 35 46 37 54 N2C045 FG0619 178 2.2 523
55 45 53 43 63 N2C055 FG0620 207 2.6 632
65 50 64 52 76 N2C065 FG0621 250 3.1 742
70 60 71 58 84 N2C070 FG0622 277 3.5 842
85 70 86 69 102 N2C085 FG0623 334 4.3 1020
90 75 92 74 109 N2C090 FG0624 358 4.6 1102
100 85 101 82 120 N2C100 FG0625 393 5 1211
120 100 121 98 145 N2C120 FG0626 472 5.9 1427
135 110 136 110 162 N2C135 FG0627 529 6.8 1621
145 120 144 116 172 N2C145 FG0628 561 7.1 1704
160 130 162 131 193 N2C160 FG0629 630 8 1914
170 140 171 138 204 N2C170 FG0630 665 8.6 2054
190 160 195 157 233 N2C190 FG0631 757 9.6 2314
215 180 219 176 261 N2C215 FG0632 849 10.8 2589
240 200 246 198 293 N2C240 FG0633 953 12.1 2905

Certifications

MAPEI_logo_rgb
THINSET

MAPEI_logo_rgb
SELF-LEVELLING

kiesel-logo
flextile-logo
Full Color White US 052813
laticrete-logo
ardex-logo
custom-logo
bostik-logo.png_1644223205

Works Well With

Maximize your floor heating solution and check out these related products to optimize your installation.

Blurb here
Nuheat-CustomMat-RadiantHeating

nVent Nuheat Custom Mats

The thinnest custom-built electric floor heating mat.

Learn More
Place image first
thermostat

nVent Nuheat Signature Thermostat

The floor heating industry’s first wifi-enabled, programmable thermostat.

Learn More
Place image first